Union Community VIRDI 3000 Guida Utente Scaricare il pdf (Pagina 41)

VIRDI AC 1000 User Guide 41

UNION COMMUNITY CO.,LTd.

3Fl. Hyundai Topics Bldg, 44-3 Bangi-dong, Songpa-gu, Seoul, Korea 138-050,

Tel: 82-2-6488-3000, Fax: 82-2-6488-3099, E-Mail:[email protected],

3.8.4. Wiegand output settings

◆ [Ent-] Æ [6] Æ ‘084265’ [Ent] Æ [4] ◆

Wiegand Out:0

0=None 1=26bit

2=34bit

Default setting: ‘0’

When this is set to [1], “Site code + user ID” is sent to the Wiegand port of the

terminal when authentication is done. It can be used only for systems where

there is a lock controller and the controller is operated by a Wiegand input. This

is usually set to [0].

- If it is set to ‘1’, user ID shall be shorter than 4 digits because “Site code [1

byte] + user ID [2 bytes]” is transferred.

- If it is set to ‘2’, user ID shall be shorter than 7 digits because “Site code [1

byte] + user ID [3 bytes]” is transferred.

※ this is not effective when a Wiegand-type card reader is used, and set the

following site code when the setting is higher than ‘1’

(0-255):000

Default setting: ‘0’

This is only available when Wiegand Out is set to ‘1’ or ‘2’. Enter the site code

(0-255) to be sent to the Wiegand port together with the user ID 니다.

Once the setting is complete, press [ENT] to move to the upper menu.

3.8.5. Terminal initialization

In the main menu, press [6] to select “6. Device” and then press [6] to select “6.

Initialize” and the following screen will be appeared:

1. Init Config

2. Delete Log

3. Init Terminal

Press [1] for settings initialization,

press [2] for authentication

record initialization,

press [3] for factory initialization.

http://www.unioncomm.co.kr

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47 48

Nessun commento

Union Community VIRDI 3000 Guida Utente Pagina 41